FCA250-115-220-FCA250系列250VA AC/AC频率转换器输入AC115V/220V 410HZ转AC220-西安浩南电子科技有限公司

FCA250系列250VA AC/AC频率转换器输入AC115V/220V 410HZ转AC220V/115V 50-60HZ

描述

这种坚固的AC / AC变频器采用焊接验证的微处理器控制的高频PWM技术来生成所需的

输出功率与纯正弦波输出电压。这是一个成熟的设计

在许多应用程序中拥有良好的记录。 AC / DC输入级

将输入电压转换为直流电压，为直流/交流馈电

变频器产生所需的交流输出。使用频率高

转换使得结构紧凑，重量轻，效率高。本机具有完整的电子保护。输入和输出是

为低噪音而。。冷却通过底板到散热表面

并通过自然对流。使用具有可靠可靠性的组件的使用导致高MTBF。该单元在我们的工厂生产

严格的质量控制

Benefts

•

•无干扰的电力敏感电子设备

•坚固耐用

•确保多年安全运行

设计特点

•对流冷却

•体积小，重量轻

•正弦波形

•250VA的输出功率

•全电子保护

•电信质量

•现场验证的设计拓扑

应用

•船舶/汽车/ RV

•电力公用事业和变电站

•电信电厂

•制造地点

• 钢厂

•军事应用（COTS）

•工业控制

•OEM应用

•太阳能/替代电力系统

• 燃料电池

Input
Input Voltage	115 or 230 VAC, 410 Hz +/- 20% are standard (other inputs available upon request)
Input Protection	Internal safety fuse Inrush current limiting Varistor Lower voltage than specifed minimum input will not damage unit
Isolation	2250 Vdc input to ground 2250 Vdc input to output 2250 Vdc output to chassis
Standards	Designed to meet EN60950-1 and related standards
EMI	EN 55022 Class A as a minimum
Output
Output Voltage	115V / 60Hz / 2.2A or 115V / 400Hz / 2.2A or 230V / 50Hz / 1.1A continuous with grounded neutral Isolated ﬂoating output optional
Output Wave Form	Sinusoidal
Total Harmonic Distortion	Less than 5% at full load
Line/Load Regulation	± 2% from no load to full load
Load Crest Factor	Maximum 3.0 at 90% load
Output Noise	High frequency ripple is less than 500mV rms (20MHz BW)
Output Overload Protection	Current limiting with short circuit protection. At approximay 300VA unit enter cycling (hiccup) mode. Thermal shutdown with automatic recovery in case of insuffcient cooling
Output Overvoltage Protection	140Vac by internal supply voltage limiting
Effciency	Min 80% at full load
Environmental Specifcations
Operating Temperature Range	0°C to +50°C
Temperature Drift	0.05% per °C over operating temperature range
Cooling	Conduction/convection
Environmental Protection	Basic ruggedizing, Conformal coating
Shock/Vibration	IEC 61373 Cat 1 A&B
Humidity	5 - 95% non-condensing
MTBF	110,000 hours @ 45°C
Indicators	output ON LED
Control Input	None
Alarm Output	None
Mechanical Specifcations
Package / Dimensions (W x H x L)	F3: 132 x 64 x 300mm (5.2" x 2.5" x 11.8"). Mounting holes are clear
Weight	2kg (4.4lbs)
Connections	12-pole barrier-type terminal block,3/8” spacing. Snap-on cover included.
Warranty	3 years