PCB参数 PCB parameter | |
板尺寸(X x Y) Maximumboard size(X x Y) | 450mm x 350mm |
最小板尺寸(Y x X) Minimum board size(X x Y) | 50mm x 50mm |
PCB厚度 PCB thickness | ~6mm |
翘曲量 Warpage | ≤对角线1% ≤1%Diagonal |
板重量 Maximum board weight | 3Kg |
板边缘间隙 Board margin gap | 构形至3 mm Configuration to 3mm |
底部间隙 Maximum bottom gap | 20mm |
传送速度 Transfer speed | 1500mm/s(Max) |
距地面的传送高度 Transfer height from the ground | 900±40mm |
传送轨道方向 Transfer orbit direction | 左–右、右–左、左–左、右–右 L-R,R-L,L-L,R-R |
传输方式 Transfer mode | 一段式轨道 One stage orbit |
PCB夹持方法 PCBdamping method | 可编程弹性侧夹自动调节板厚边缘锁定基板压紧(选项:1、底部整体吸腔式真空;2、底部多点局部真空) Programmable elastic side clamp Automatic adjustment plate thickness Mdge locking of base plate pressing (Option: integral cavity type vacuum; multi-point local vacuum) |
板支撑方法 Support method | 磁性顶针等高块(选项一、真空腔体;选项二、专用的工件夹具) Magnetic thimble Equal high block.(Optional: suction cavity; workpiece fixture) |
印刷参数 Printingparameters | |
印刷头 Printing head | 悬浮式智能印刷头(两个独立的直联马达) Floating intelligent printing head (two independent direct connected motors) |
模板框架尺寸 Template frame size | 470mm x 370mm~737 mm x 737 mm |
印刷区域(X xY) Maximumprinting area(X x Y) | 450mm x 350mm |
刮刀类型 Scraper type | 钢刮刀/胶刮刀(角度45°/55°/60°按印刷工艺匹配选择) Steel scraper/Glue scraper(Angel 45°/50°/60° matching the printing process) |
刮刀长度 Scraper length | 300mm(可选配200mm~500mm长度)(optional with length of 200mm-500mm) |
刮刀高度 Scraper height | 65±1mm |
刮刀片厚度 Scraper thickness | Diamond-like carbon涂层 Diamond-like carboncoating |
印刷模式 Printing mode | 单或双刮刀印刷 Single or double scraper printing |
脱模长度 Demoulding length | mm-12 mm |
印刷速度 Printing speed | 0 ~ 200 mm/s |
印刷压力 Printing pressure | |
印刷行程 Printing stroke | ±200 mm(从中心)(From the center) |
清洗参数 Cleaning parameters | |
清洗方式 Cleaning mode | 1、滴淋式清洗系统;2、干、湿、真空三种模式 1. Drip cleaning system; 2. Dry, wet and vacuum modes |
清洗擦拭板长度 Length of cleaning and wiping plate | 380mm(可选配300mm,450mm,500mm)(optional with 300mm, 450mm, 500mm) |
影像参数 Image parameters | |
影像视域(FOV) Field of view | 8mm x 6mm |
平台调整范围 Platform adjustment range | X:±,Y:±,θ:±° |
基准点类型 Benchmark point type | 标准形状基准点(见SMEMA标准),焊盘/开孔 Standard shape benchmark point(SMEMA standard),solder pad/openings |
摄像机系统 Camera system | 单独照相机,向上/向下单独成像视觉系统,几何匹配定位 Independent camera,upwards/downwards imaging vision system,geometric matching location |
性能参数 Performance parameters | |
重复定位精度 Repeat positionaccuracy | ±μm @6 σ,Cpk≥ |
印刷精度 Repetitionaccuracy | ±μm @6σ,Cpk ≥ |
循环时间 Cycle time | <7s(不包含印刷及清洗)(Exclude printing and cleaning) |
换线时间 Product changeover | <5min |
设备 Equipment | |
功率要求 Power requirements | AC220V±10%,50/60HZ,15A |
压缩空气要求 Compressed air requirements | 4~6Kg/cm2 |
操作系统 Operating system | Windows XP(选配Win7)(Optional WIN7) |
外观尺寸 External dimension | 1152mm(L) x 1415mm(W) x 1540mm(H) (不含三色灯,显示器和键盘)(Withoutlight,monitor and keyboard) |
机器重量 Machine weight | 约1000Kg |
所有评论仅代表网友意见,与本站立场无关。